Saab 93 Key Fob Replacement
Saab key fobs 93 could be costly to replace. However, the process is very easy.
All you need is a flathead screwdriver, and some patience. Put the screwdriver in the middle of the case, and slowly open it.
It is recommended to keep spare fobs and keys. You can avoid being left stranded and incurring towing costs.
How do I replace the battery?
Car key fobs that can lock and unlock your vehicle remotely have a battery inside that will eventually fail. With just a few steps, owners can easily replace the key fob's battery. To remove the old battery from the key fob and replace it with a brand new one, you'll need to open two flaps made of plastic on one side. The replacement battery is the standard CR1632 coin cells and the procedure for installing it is relatively straightforward.
After removing the emergency key, you can make use of the flathead screwdriver on small pieces of wood to break the case. Be careful not pushing it too hard, as the electronics inside the case are delicate and can be damaged when you apply too much pressure.
Saab produced some fantastic automobiles, and a number of them are still in use around the world today. One of the big problems with these cars, however, is their ignition keys. They are not very durable, and the keys may become spongy or loosen with time. It is expensive for the Saab owner to purchase a new key from a dealer if they lose their only working one. They will need to replace the computer module and then program the new key in order to convince the car that you are not attempting to steal it. The good news is that you can save a significant amount of dollars by simply replacing the case instead.
How to remove the manual key
Key fobs that lock and unlock cars contain batteries, and those batteries do have a time-limit. If you're like most people you'll lose yours at some point. Fortunately that replacing the battery for your manual key fob is simple. The only thing that is difficult is removing the old one from the case, but that's nothing a little patience and a little bit of effort with a flathead screwdriver cannot help you with.
Once you have the new battery installed Now it's time to put it back together. You'll need a flathead in order to unlock the replacement case of the key fob. Insert the screwdriver into the middle slot. Gently work the case until it splits open and you can take it off of the key fob.
You may have to reprogram the new key fob in case your previous key fob failed to establish its connection to the car's security system. You can do this by following the manual learning procedure to add a new fob for your Saab 9-5. This method is not a way to invalidate previous learned keys. You can still use the same FOBs that you have, if you need to re-program them. To initiate this procedure the FOB that is to be programmed must contain the mechanical key cut to match that of the vehicle.
How to change saab replacement key programming
If you're replacing the battery or the manual key it's a good idea replace the case as well. These cases are prone to wear out, especially after prolonged use. Removing the case from your SAAB 9-3 is quite simple, and you don't even need any special tools to perform the task.
The first step for changing the case is to remove the manual key from the fob. You can do this by pressing the blue SAAB logo on the fob before pulling the manual key out. The key fob may be a bit sticky, so it might require a bit of force to take the key out.
After you've removed the manual key, you're able to begin taking the electronic components from the case. You'll need an flathead screwdriver to accomplish this. You'll need to take care not to harm the electronics inside, so use care when using your screwdriver. After you've removed the electronic components, you'll need remove the battery. Once you've changed the battery, you can put everything back together in an entirely new case. You can purchase replacement cases on the internet for a pretty cheap price.
How to program the new key
Key fobs that allow you to lock and unlock your vehicle remotely, come with batteries. However they are limited in their life span. It is important to remember this and change the battery in your key fob at least every 3-4 years. This is a simple procedure that you can carry out at home. All you need is a small screwdriver, and a bit of patience.
The first step is to remove the manual key. You can do this by pressing the blue SAAB logo on the key fob, then pulling the emergency key out. The key should pop out with some force. After you have opened the key fob, you are able to remove the battery by gentle pressing the screwdriver inside the slot that is in the middle. This will split the case and make it easier to access the electronics.
It is now time to program the key. This can be done by following the instructions in this YouTube video by YouTube Cyclone Cyd. The channel offers excellent instructions on how you can perform simple repairs and maintenance on cars.
The key fob is an excellent method of keeping an extra key in your car in case you lose it or break it. You can buy a brand new keyfob on the internet or from local locksmiths like United Locksmith. The price is less than at a dealership, which will charge you for the key and programming it for the car.